| |
|
Comments
Message
Type: Praise
subject:
Just a quick note
Usemame:
Mike Barnett
Comments:
What an
interesting web! I especially liked the mine shaft info,
thrilling to sit here at my keyboard and peer into the
shafts Must be snakes down in there huh?
I'm a
bench tech too with 20 years experience in consumer goods
and play with the casino stuff when I can, my state is
illegal to gamble, but often wondered what it would be like
to work for a casino. I liked the part about your holding
the chassis with that shorted FBT.
A shock
is a shock, but I bet that was a friggin JOLT. Did you break
a sweat with that jolt? lol You know the rule keep one hand
in your pocket. Do you have any info on a IGT RGB monitor
for an old KENO game?
On the
main pcb there is a small T039 trans marked 103YY that I
cant cross, any ideas? Looks like the 12v runs right into it
from the supply. I know, do the caps first in the monitor)
I'm also in need of an old poker PCB for a small upright
cabinet made by CAL OMEGA, if I cant find the pcb or one
that fits, I'd like to convert the harness to a newer cherry
game.
Message
Type: Praise
Subject:
Web Site
Usemame:
Chuck Lentine
Comments:
Seen your
post on Slot-techs.com Nice website, very organized! I was
wondering if you ever came across a Bally Pro with a "Twenty
Grand" kit in it. I'm trying to install it on my Bally Pro,
but keep getting a error code of "91FF".
I believe
it's looking for a wheel on the top? Maybe I could make one,
I just need to find out what motor it uses, and where it
plugs in at on the CPU.
Message
Type: Praise
Subject:
Web Site
Usemame:
Mark Hartman
Comments:
Hi, Just
a quick note to let you know that I found your site very
informative and easy to navigate. I would love to see more
information on IGT S+ slots.
Great
job!
Mark
Message
Type; Praise
Subject:
Web Site
Subject
Other: JCM POWER SUPPLIES
Usemame:
JOEL ROSENBERG
Comments:
ITS NICE
TO KNOW THERE ARE OTHER E-TECHS THAT R WILLING TO SHARE
INFORMATION. GREAT JOB ON THE WEB SIGHT. I THOUGHT YOU MIGHT
WANT TO ADD THIS IN YOUR POWER SUPPLY SECTION FOR THE JCM.
I HAVE
FOUND QUITE A FEW OF THE POWER SUPPLIES WORKING WITH THE CAP
REPLACEMENT BUT 1 HAVE ALSO ADDED THE K1445 AS A REGULAR
REPLACEMENT. IF THIS TRANSISTOR IS WEAK OR SHORTED THE POWER
SUPPLY OUTPUT WILL SHOW ALL THE WAY UP TO 12.18VDC BUT WHEN
A LOAD IS PUT ON THE POWER SUPPLY THERE IS A VOLTAGE DROP
QUICKLY TESTED UNDER INPUT TEST ON PE PLUS THE BV SHOULD
LIGHT UP THANKS AGAIN
As a
veteran slot technician myself, I found your website very
accurate. I appreciate you sharing your knowledge with other
techs.
Sincerely,
Billy Boykin
My
name is Joe Goodwin I have been a tech for 12 years and
just wanted Thank you for your Site
you
are a very inventive guy, congratulations for your web,
it is very good, I'm a slot technician in Venezuela
Category: Web site
Name: Glenn Kennedy
Date: 08 Oct 2003
Time: 12:15:56
Comments:
In General - Very Impressive ... Very Informative ...Give
yourself a pat on the back for all the time and effort you
must put in maintaining such a site.
Regards,
Glenn Kennedy
Nova Scotia, Canada
I'm
Nildo nice to meet you.. Your site is really good.
I
Have a question , may you help me?
17 OCT 03
Dean Engen
As I read through your web site, which is very good
I might add. I noticed in your links column that you
didn't have anything on these bill heads, we have
been repairing these
and found on the (IVO) that the coil breaks on a
lead causing lose of power so we re-solder the lead.
On the (IDS) we see a lot of blue sensor failures,
these sensors apply to both bill heads.
Oct
19 2003
Bonjour, Hello
I held has to you feliciter for this site
which is very useful for us French
technicians and I thank you for that.
we often come on your site to widen our
knowledge and to find the solution of our
breakdowns slot machine.
thank you for information that you bring to
us.
Fabrice Bianchin. Technician slot machine
Casino Cannes Croisette - Lucien Barriere
|
Category: Web site
Name: Rod Schiszik
Title:
Owner
Company: Az Slot LLC
Address: Glendale, Az
Date: 25 Oct 2003
Time: 04:20:49
Comments:
Very informative and helpful resources made available to
all levels of the gaming industry. This is an Awesome
Website!
Rated one of the best!!
AZ SLOT LLC.
Category: Web site
Name: Javier
Title: Technician
Address: Miami Fl
Date: 26 Oct 2003
Time: 10:27:56
Comments:
Love your Site!!!
Thanks
Javier
Category: Web site
Name: Jerry Hord
Date: 31 Oct 2003
Time: 20:03:43
Comments:
Your site is a lifesaver!! Thanks to your suggestion on
replacing the IC chip on the motherboard, I have finally
gotten my IGT slot back in order!! I've bookmarked this
site and have told my friends who also have slots to visit
here. Thanks again for all your help!
Category: Web site
Name: Hog
Title: Electronic Tech.
Date: 03 Nov 2003
Time: 09:09:48
Comments:
Great site, I have used your fixes for myself. Thank you.
Sentence two and three have a misspelled word in each. I
don't like being critical because my spelling is atrocious.
Again as for your site, it's great.
|
Correction have been made &
Thank you Hog
There may be more misspelled
words, Will work on Correcting them
|
Alyce
Sunday,
November 16, 2003 8:57 AM
Your site
is the first I check with, it has helped me a number of
times, and its great that you take the time to post this.
I'm sure many people have the same thought.
if it
is possible to ask a question here you might reply, if
not take the above as my thanks anyway.
On
bally s5500 that will not ram clear after battery change
,is there a way to clear by another method
on
the board. or is there a common part that is well known
to you.
Category: Web site
Name: Thomas Moore
Title: Slot Technical Manager
Date: 21 Nov 2003
Time: 11:25:20
Comments:
Great Site!
I enjoyed my visit, I have added your site to my favorites
list!
Rob Voss
Friday,
November 21, 2003 1:24 PM
love
your website- I've been fussing w/ my Bally s5500 and
your notes are invaluable, I appreciate it!
Category: Web site
Date: 22 Nov 2003
Time: 14:48:38
Comments:
Great site, man. You're a dedicated individual.
Shaun
Knight
Thursday,
December 04, 2003 3:37 PM
Hi,
I was surfing the net and came across your
website....it's great! Keep up the great work.
I noticed that Kevin Noble had contributed some
efforts here. I was nicely surprised to see his name
pop up again....I had tried some years ago to hire
this guy! What an awesome tech, and a great guy to
boot! (I hope it's the same one....it MUST be).
Cheers,
Shaun
Gold Plus
Tuesday,
December 09, 2003 6:53 PM
Greetings
I was surfing the web looking for specs on what I assume is
an Eprom from a JCM bill head and came across your site.
I'll have to say you have tons of information and I can
appreciate the time and effort you've devoted to your site.
I am not a slot tech nor do I have a machine. I live 5
minutes from Atlantic City and sometimes I come across some
parts, mainly glass, that I sell on Ebay.
I was looking for the specs on the following chip:
JCM American
WBA-13-SS
Id 0c3 USA
v 2.03.-07 (665C)
Category: Web site
Name: Richard Walton
Date: 14 Dec 2003
Time: 07:15:23
Comments:
This is really a cool site and I'm sure it'd going to be
helpful. I just bought a Bally
SUPER CONTINENTAL 1-6 coins. right now the machine works
fine.
*******************************************************************************
Category: Web site
Name: Justin Henning
Title: Mechanic
Date: 04 Feb 2004
Time: 14:49:11
Comments:
Great site man. Your notes are extremely helpful as we are
starting our own monitor repairs here. I do have a couple of
questions though. Do you have any Ceronix 1793 boards that
you have worked on, and will you be updating your monitor
repair section anytime soon?
Category: Web site
Name: JOHN HAAS
Date: 04 Feb 2004
Time: 22:15:12
Comments:
HI ROBERT, JUST TO LET YOU NO YOU DO A GREAT JOB ON TECH.
SUPPORT, AND YOUR INFORMATION THAT YOU SUPPLY TO THE PEOPLE
THAT ARE NEW GETTING IN THE HOBBY OF SLOT MACHINE OPERATION.
YOUR WEB SITE IS FULL OF FREE INFORMATION THAT YOU CAN USE
TO MAYBE FIND PROBLEMS THEY MAY BE HELPFUL ON GETTING A
MACHINE UP. ANYWAY YOUR THE BEST DON'T EVER CLOSE THIS WEB
SITE, I'LL BE LOST!!!! AGAIN THANKS FOR YOUR SUPPORT AND
THE INFORMATION YOU HAVE SUPPLIED EVERYONE ON THE WEB!!!
THANKS JOHN
*******************************************************************************
Category: Web site
Name: Ed Wright
Title: Slot Technician
Date: 20 Feb 2004
Time: 11:44:19
Comments:
I've been to your site on a few occasions and find it to be
helpful in not only assisting with a problem I might have,
but to get a feel for what it's like to be in a REAL tech
shop.
Unfortunately many of us are limited in what we can do
because of the availability (or lack of) the proper testing
equipment and as a result are limited to the old "swapping"
technique in our troubleshooting.
Thanks for a great site and keep up the good work!
Saturday,
March 20, 2004 6:35 AM
HI
ROBERT, YOU HAVE A GREAT SITE AND IT SEEM'S IT ONLY GETS
BETTER I DON'T NO WHERE YOU FIND THE TIME TO DO SUCH A GREAT
JOB!!!
THANKS FOR ALL OF THE
INFORMATION YOU HAVE BEEN TEACHING ME AND OTHERS. YOU DON'T
NO OR MAYBE YOU DO!! HOW MUCH HELP YOU HAVE BEEN. YOU HAVE A
GREAT HEART AND TALENT!!!! AGAIN THANK YOU SO MUCH FOR
HAVING A WEB SITE SUCH AS YOURS. JOHN HAAS
john haas
Tuesday, March 30, 2004 5:08 PM
HI ROBERT, JUST TO LET
YOU KNOW THAT YOUR SITE IS OUT OF THIS WORLD ( KNOWN AS THE
BIBLE OF ELECTRONICS) .
Ceaser1955
Monday, March 29, 2004 5:53 AM
Hi Robert,
I just want to say that your web sight is
very helpful.
Jens Bieler
17 May 04
Robert,
Some 2 (?) years ago you helped me with the installation
of the progressive system in my s-plus. Since this time I
visited your page a lot of times, 'cause it's a good source
for information! well done!
Bachoo Gowtum
Date: 17 May 2004
Time: 10:43:01
Comments:
Great web site. Very helpful to the slot tech.
Category:
Web site
Name: mike
Title: slot
tech
Date: 22 May
2004
Time:
09:26:44
Comments:
hey dude,,
I am a slot tech at the showboat in A.C I am I have found
your site a great help in just tech tips alone. it has been
some time since I have stopped in and I just came across
your info in the union.
ever since I found this site I let the other guys at work
know about it. one of the things I want to mention is that a
few of us started to get pocket pc's aka pda's but in the
windows format. I have found this makes it easer then
carrying tons of notes written down on paper. with enough
mem.. you can store full manuals and I do have em. when you
need the info it is right there on the pocket pc you got to
love em.
thanks allot for making a great site.
thanks again
mike
Bob Staples
Monday, June 14, 2004 9:32 PM
Hi Bob, just been checking out your web site, I think its
great, will be a
good resource for me. Carry on the good work.
Regards
Bob aka britbob1
(argosy casino, Lawrenceberg, Indiana
Ken Herman
Date: 19 Aug 2004
Time: 13:18:22
Comments:
I think it is excellent I will be using your information to
improve my knowledge best I've found so far
Tim Bohmer
Date: 26 Aug 2004
Time: 06:41:49
Comments:
I'm impressed! Will use it regularly!
Robert - great web site!! slot notes has given me a lot
of info!
Krusher
27 Aug 2004
Thanks Robert, I really cant thank you enough!
Without your webpage I would NOT have been able
to make the cable, And Have used it as a over all
great bit of tech reading!!
Please never kill your site,
if $$ ever becomes a Issue, '
Im low as heck income but I would
contribute a little $$ to help..
And Thank you for being a generally great person
and sharing your Wealth of information!!
|
|
Robert's
Slot Notes (RESULT)
Joe
Goodwin