IGT Descriptions of switches

RESET SWITCH

The "RESET SWITCH" is used to reset a game when an error code is indicated and a game is invalid, or to cancel the "SELF-TEST PROGRAM" and to return to a normal game

DOOR SWITCH

The "DOOR SWITCH" is used to check to see if the front door is open or not. It is "OFF" when the front door is open. When it is open, the error code "50" is indicated on the "WINNER PAID METER" and the normal game does not work. Please note that the "FRONT DOOR KEY SWITCH" also checks to see if the front door is open or not

TEST SWITCH

The "TEST SWITCH" is used to place the machine in test modes by pressing the button to correspond with the test mode required. (e.g. TEST PORT NO. 4; press the button 4 times.)

COIN TEST SWITCH

The "COIN TEST SWITCH" is used to create game credits for testing and only while the front door is open. Each time the "COIN TEST SWITCH" is pressed, game credits increase. However, there is no actual payout while you are testing games. When you close the front door, the game credits made by using this switch are cleared.

COIN SWITCH

The "COIN SWITCH" is using two photo sensors to count the inserted coins to check the time and direction of a coin passing through it.

VOLUME CONTROLLER

The "VOLUME CONTROLLER" is used to adjust the sound volume, which this machine will make.

MAIN POWER SWITCH

The "MAIN POWER SWITCH" is used to switch AC power on or off.

HOPPER OVERFLOW CONTROL SWITCH:

The "HOPPER OVERFLOW CONTROL SWITCH" is used to select the ways of checking the quantity of coins inside the "HOPPER UN IT" or the "CASH BOX".

CONTROL BY CONDUCTION

The checking terminals inside the "HOPPER UNIT" checks the quantity of coins and control the way of the inserted coins, that is, into the "HOPPER UNIT" or the "CASH BOX".

CONTROL BY PROGRAM

Instead of conductors, the program itself checks quantity of coins and controls the way of inserted coins, that is, into the "HOPPER UNIT" or into the "CASH BOX". The microprocessor memorizes the quantity of coins and determines the remaining quantity of coins by calculating.

JACKPOT RESET KEY SWITCH/PASSING TIME ADJUSTMENT SWITCH

JACKPOT RESET KEY SWITCH

This key is used to clear the status of "JACK-POT/TILT" in case of the "DOLLAR VERSION" (Refer to the clause of "AUTOMATIC HOPPER PAYOUT" and "JACKPOT RESET".).

PASSING TIME ADJUSTMENT SWITCH

This key is also used to adjust the time limitation for a coin to pass through the "COIN SWITCH". You can adjust the maximum time and the minimum time by turning this switch in counter clock wise and in clock wise respectively. Please note that this adjustment is available only during the "TEST PORT NO. 3" of the "SELF-TEST PROGRAM".

METER READING KEY SWITCH

The "METER READING KEY SWITCH" is used to activate the "METER READING PROGRAM" and to select the "METER READING NO.". The game and operation status (such as "TOTAL IN", "TOTAL OUT", "TOTAL PAYOUT %", etc.) can be monitored on the "WINNER PAID METER".

CHANGE BUTTON SWITCH

The "CHANGE BUTTON SWITCH" is located on the front door and used when a player needs an attendant's help while playing a machine. When you press the "CHANGE BUTTON SWITCH" for an attendant's help one time, the "TILT" lamp on the tower light is turned on. If you press the "CHANGE BUTTON SWITCH" again, the light can be turned off.

COINS TO CASH BOX SWITCH

The "COIN TO CASH BOX SWITCH" is using one photo sensor to count the coins being overflowed into the "CASH BOX".

DIP SWITCHES

The "DIP SWITCHES" are not shown in Fig. 11 but are located on the "MAIN LOGIC BOARD". These switches are used to select the following functions.

DIP SWITCH 1 This switch is used to select the type of the output signal in case of "LINK PROGRESSIVE".

DIP SWITCH 1 "OFF". The machine releases "LEVEL OUTPUT" until the status of "JACKPOT" is reset when a jackpot is won.

DIP SWITCH 1 "ON" . The machine releases "PULSE OUTPUT" only for 10 seconds when a jackpot is won.

DIP SWITCH 2 This switch is used to select the functions of the machine, for "PROGRESSIVE" or for "NON-PROGRESSIVE".

DIP SWITCH 2 "OFF" NON-PROGRESSIVE

DIP SWITCH 2 "ON" PROGRESSIVE

DIP SWITCH 3 This switch is used to select the type of "AUTOMATIC HOPPER PAYOUT".

DIP SWITCH 3 "OFF" ...... The machine pays out up to 1,200 coins

DIP SWITCH 3 "ON" The machine pays out up to 650 coins.