EMBOSSER

Making Employee (RED) SDS Cards

                                                                                              Insert Red SDS Cards Face Up

Magnetic Strip down

When Done, Pick up your Red Cards Here

 Note: If it’s not in the Slotech Layout. You will need to use the Arrow Keys to select the Layout then Press <Enter> Key

Use the Arrow Keys to Select SLOTECH then press <Enter> Key

 Press <Enter> key

(This is the Number to be embossed on the card)     

Type Card Number then Press <Enter>

(This is the Name to embossed on the card)   

Enter Employee Name then Press <Enter>

(This is the Number to be coded in the Magnetic Strip)

After you enter the 4-digit number the screen will go back to

Enter Card Number showing the 4 digits Number

At this point press the + key

The Card Count should be 1 (One)                                                   

                Then Press <Enter>

The embosser will make your 1 (One) card

NOTE: When done press ESC Key

Return Embosser to the

Or

Test the Card

Notes:

Use the Numbers Keys Here    for Typing in the Numbers. 

The Numbers on this side will not work

By: Robert Sult

With help from Patrick Leary