Burning E-Proms / Flash                                                                          By: Robert E. Sult AOS

BURNING E-PROM WITH X-PRO-1

Desktop Programming System

 Sample:

Burning E-Prom for WBA13 from Master E-prom with the X-PRO1

The X-Pro 1

---

Turn On The X-Pro1

---

(1)

Press Menu/SEL

Display will change

---

(2) Press F3/Next

---

(3) Press F3/Next until 27040 (12 qck)

---

(4) Press Menu/SEL

---

(5) Insert Master E-Prom

---

(6) Press Load

---

Unit will come up with CKSM     CKSM=017fEDE9H

---

(7) Remove Master E-Prom

---

(8) Insert Blank E-proms

---

(9) Press Menu/SEL

---

(10) Press Prog

The Unit will check to

A) Ensure the E-proms are Blank

B) Then it will Program the E-Prom

C) Verify the Program is correct

Note: Blinking LED, means it failed (Also the Number will Blink)

  They All are Good

---

This Shows where # 2 Failed

---

(11) Remove E-Proms

(12) Insert more Blanks

(13) Press Menu/SEL

(14) Press Prog (Program)

Repeat the Process

---